我在看RK3588本地部署DeepSeek-R1.pdf这个文档，上面讲要下载miniConda到x86 Linux服务器，然后通过执行“Miniconda3-4.7.12.1-Linux-x86_64.sh”脚本来安装miniConda到服务器上。但是终端实操执行的脚本却是“Miniconda3-latest-Linux-aarch64.sh”，我不清楚到底是应该在x86服务器上安装x86的miniCoda呢？还是安装aarch64的miniConda的脚本呢？

forrest

su@DESKTOP-NVUG00O:~/Anaconda$ ./Anaconda3-2025.06-0-Linux-aarch64.sh
WARNING:
    Your machine hardware does not appear to be aarch64,
    but you are trying to install a aarch64 version of Anaconda3.
    Are sure you want to continue the installation? [yes|no]
[no] >>> yes

Welcome to Anaconda3 2025.06-0

In order to continue the installation process, please review the license
agreement.
Please, press ENTER to continue
>>>
By continuing installation, you hereby consent to the Anaconda Terms of Service available at https://anaconda.com/legal.


Do you accept the license terms? [yes|no]
>>> yes

Anaconda3 will now be installed into this location:
/home/su/anaconda3

  - Press ENTER to confirm the location
  - Press CTRL-C to abort the installation
  - Or specify a different location below

[/home/su/anaconda3] >>>
PREFIX=/home/su/anaconda3
Unpacking payload ...
./Anaconda3-2025.06-0-Linux-aarch64.sh: 333: /home/su/anaconda3/_conda: Exec format error

----------------------------------------------------------------------------------------------------------------------------------------
我按照教程运行“/Anaconda3-2025.06-0-Linux-aarch64.sh”脚本，程序返回错误。这和教程表现不一致，是因为我安装的不是miniConda么？

水精灵

我们提供的教程是在x86架构的虚拟机上进行conda工具的安装的，安装脚本也是x86架构的，参考教程：ELF 2 - RK3588本地部署DeepSeek-R1。